214141633Metallization Booths
Metallization Booths
• Our Metallization Booths enable high
productivity and safety indices, due to their exhaust ventilation system for
capturing dust, fume or vapour, with noise protection that prevents viewing the
head of the metallization spray gun. This system requires extremely small
foundations, and can even be built without foundations.
FEATURES
• Door(s):
The service door(s) can be metallic and opened manually, power-driven doors reinforced canvas with metal profiles or on the roof.
The service door(s) can be metallic and opened manually, power-driven doors reinforced canvas with metal profiles or on the roof.
• Booth structure:
Constructed in sandwich panel profiles, 4 cm thickness, of polyurethane, or carbon steel plate bolted together, enabling construction of any size. The Booth is entirely lined with anti-abrasive rubber (side and doors - 3 mm).
Constructed in sandwich panel profiles, 4 cm thickness, of polyurethane, or carbon steel plate bolted together, enabling construction of any size. The Booth is entirely lined with anti-abrasive rubber (side and doors - 3 mm).
• Lighting:
Sealed against abrasive and dust tight, and dimensioned to obtain maximum luminosity inside the Booth.
Sealed against abrasive and dust tight, and dimensioned to obtain maximum luminosity inside the Booth.
• Metallization Equipment:
Electro-metallizing machine type M45 - run on a power supply of 380 V/50-60 Hz, nominal voltage of 13.5 and 24 kW and consumption of 4.5 and 10 kW/h, maximum intensity of 450 A, output of 21-35 V, consuming 6 to 10 bars of compressed air.
Electro-metallizing machine type M45 - run on a power supply of 380 V/50-60 Hz, nominal voltage of 13.5 and 24 kW and consumption of 4.5 and 10 kW/h, maximum intensity of 450 A, output of 21-35 V, consuming 6 to 10 bars of compressed air.
• Control panel:
Mounted inside an armoured cabinet, equipped with programmable logic controller for automatic control of the equipment's functions.
Mounted inside an armoured cabinet, equipped with programmable logic controller for automatic control of the equipment's functions.
• Dedusting Unit:
The combination of deflectors for air inflow/outflow guarantee excellent visibility, and also eliminate the abrasive waste. Filtering cartridges with polyester elements, automatic cleaned by an electronically controlled pulse-jet system. Optionally, among others, the equipment can be supplied with noise muffler / HEPA type filter.
The combination of deflectors for air inflow/outflow guarantee excellent visibility, and also eliminate the abrasive waste. Filtering cartridges with polyester elements, automatic cleaned by an electronically controlled pulse-jet system. Optionally, among others, the equipment can be supplied with noise muffler / HEPA type filter.
- Various materials are available for metallization such as metals, metal alloys, ceramics, plastics and composite materials. These materials are fed either in powder or wire form, heated to a molten or semi molten state and accelerated by compressed air towards substrates in the form of micrometre-size particles.